Guide for Installing French Closet Doors
French closet doors can be installed with easy steps with the following guide. First, French closet door can be installed after you remove the old closet doors of course. For example, if the old doors are the sliding doors, then you need to leave the track on the bottom and top of the closet itself. You also need to remove any existing hardware from the original closet doors which may remain on the door jamb’s side. This step of removing will help you a lot for faster process.
Second step is, French closet doors are installed after you precisely measure the spot on the door jamb. For this, you can measure French doors for closet using a measuring tape, use it on the top hinge is needed to be installed. For this, you can use the attached hinges on the French doors as your guide. It is very helpful because with this you know which spots which fit best with the new French doors for your closet.
Third, you need to mark the spot where you are going to install French closet doors carefully using pencil. You also need to mark the bottom hinge in order to make the result is better of course. This step must be done carefully because when you spot on the wrong spots, the results will not be so pleasant, moreover you can use the existing spots so this step is of course easier to do. Do this step both for the sides of the doors.
Fourth, French closet doors can be installed by attaching the hinges to the door jamb right at the bottom and top of the both for the right and left sides of the doorway. For this, you need to use the proper screwdriver and of course the proper screws. There are many options of screws which you can use and you can suit it with the width or the doors and of course the look that you desire for the closet later.
Lastly, French closet doors are installed by sliding the left French door’s hinges into the hinge that you have mounted on the door jamb. Then, simply slide the hinge pin into the hole at the right top of the hinge and down. This step is done in order to keep the French doors are tightly connected to the jamb’s doors. Then, with those steps you can install the French doors for the closets.